| 產品型號：Q503WD15BGF40 產品描述：5050三晶正白 | |||||||
| 相關參數： | |||||||
| 光通量：10-12LM | 光強：3000-4000mcd | ||||||
| 電壓：3.0-3.2V | 色溫：2700-3200K、6000-7000K，也可看樣板定做！ | ||||||
| 顯色指數：73-75 | |||||||
| 1000H常溫下光衰：<4% |
| ||||||
Storage
Recommended storage environment
Temperature: 5oC ~ 30oC (41oF ~ 86oF)
Humidity: 60% RH Max.
Use within 2 days after opening of sealed vapor/D barrier bags.
If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, bakingtreatment should be performed using the following conditions.
Baking treatment : 70&plun;5℃for 24 hours.
Fold the opened bag firmly and keep in dry environment.
Soldering
| |||||||||||||||||||||||||||||||||||||||||||||
*After reflow soldering rapid cooling should be avoided.
[Temperature-profile (Surface of circuit board)]
Use the conditions shown to the under figure.
＜1 : Lead Solder＞ ＜2 : Lead-free Solder＞
|
[ Recommended soldering pad dign ]
Use the following conditions shown in the figure.
Handling of Silicone Rin LEDs |
Handling Indications |
During procsing, mechanical strs on the surface should be minimized as much as possible. Sharp objects of all t should not be used to pierce the sealing compound |
|
Figure 1 |
In general, LEDs should only be handled from the side. By the way, this also appli to LEDs without a silicone sealant, since the surface can also become scratched. |
|
Figure 2 |
When populating boards in T production, there are basically no rtrictions regarding the form of the pick and place nozzle, except that mechanical prsure on the surface of the rin must be prevented. This is ured by choosing a pick and place nozzle which is larger than the LED’s reflector area. |
Dimensions for Tape
Dimensions for Reel
|
Not:
1.All dimensions are in mm, tolerance is&plun;2.0mm unls otherwise noted.
2.Specifications are subject to change without notice.
Packing
Not:
1.All dimensions are in mm, tolerance is&plun;2.0mm unls otherwise noted.
2.Specifications are subject to change without notice.
請我們的標簽和包裝方式（5050一包一K）
包裝前
箱
生產車間
分光編帶機
A自動焊線機
倉庫！
貼片D3014 3020 3528 3535 5050 3014生產供應商，三家工廠為您服務，專為燈條，模組，燈具廠家研發高質量的燈珠！十年品質。不用擔憂貨源找不到，質量找不好，價格談不攏的問題。你的選擇您的滿意。歡迎來電咨詢與索樣 ！附深圳分廠（高拓光電）貼片生產車間供參考，盜圖究！
