CSD Series Current Devices
Code . LIT
Issued August 12, 2008
Description
The Current Switch Device (CSD) Series of
dial output current switches are
n-intrusive devices designed to detect
current flowing through a cable or wire. A
cost-effective solution for monitoring on and
off status or proof of operation, these units are
ideal for monitoring very all current loads
on motors driving fans, blowers, pumps,
heating coils, and lighting.
The CSD models with command relays t
only monitor the current flowing through the
cable but also facilitate the start and sping
of the motor.
These units also provide a universal
solid-state output and do t require a power
supply. Completely self-powered, these units
draw their power from current induced from
the cable or line being monitored.
CSD Series Current Devices are available in
the following tes:
?solid core, setpoint fixed
?solid core, setpoint adjustable
?solid core with command relay,
setpoint adjustable
?split core, setpoint fixed
?split core, setpoint adjustable
?split core with command relay,
setpoint fixed
?split core with command relay,
setpoint adjustable
Refer to the CSD Series Current Devices
Product Bulletin (LIT) for important
product application information.
Features
?dual function ?monitors current and motor
start and s
?100% solid-state output ?has moving
parts to fail
?polarity insensitive output ?provides
easier wiring
?snap-in mounting bracket ?simplifies
installation
?all size ?fits in tight enclosures
Fixed Setpoint Models
CSD-SF0C0-1 (solid core)
?Setpoint fixed at 0.25 A
?Current range ?0.25 to 200 A
CSD-CF0A0-1 (split core)
?Setpoint fixed at 0.15 A
?Current range ?0.15 to 200 A
CSD-CF0J0-1 (split core)
?Setpoint fixed at 1.5 A
?Current range ?1.5 to 200 A
CSD-CF0J1-1 (split core with command relay)
?Relay Single Pole, Single Throw (SPST),
rmally Open (), 10 A @ 260 VAC, 5A
@ 30 VDC
?Actuation coil ?20-30 VAC/DC,
32.5 mA maximum
?Setpoint fixed at 1.5 A
?Current range ?1.5 to 200 A
Adjustable Setpoint Models
CSD-SA1E0-1 (solid core)
?Multi-turn potentiometer ?adjust setpoint
for application
?Adjustable setpoint ?wide range from
1.0 to 135 A
?Two status Light-Emitting Diodes (LEDs)
?provide visual indication of off and on
status
CSD-SA1E1-1 (solid core with command
relay)
?Multi-turn potentiometer ?adjust setpoint
for application
?Adjustable setpoint ?wide range from
1.00 to 135 A
?Relay SPST, , 10 A @ 260 VAC,
5 A @ 30 VDC
?Actuation coil ?20-30 VAC/DC,
32.5 mA maximum
?Two Status LEDs ?provide visual
indication of off and on status
CSD-CA1G0-1 (split core)
?Multi-turn potentiometers ?adjust setpoint
for application
?Two status LEDs ?provide visual
indication of off and on status
CSD Series Current Device
?Adjustable setpoint ?wide range from 1.25
to 135 A
CSD-CA1G1-1 (split core with command
relay)
?Multi-turn potentiometers ?adjust setpoint
for application
?Adjustable setpoint ?wide range from
1.25 to 135 A
?Relay SPST, , 10 A @ 260 VAC,
5 A @ 30 VDC, 12.8-26mA
?Actuation coil ?20-30 VAC/DC,
32.5 mA maximum
?
?Two status LEDs ?provide visual
indication of off and on status
Repair Information
If the CSD Series current device fails to
operate within its specifications, replace the
unit. For a replacement CSD, contact the
nearest Johnson Controls?representative.
Selection Chart
Code Number Core Te Setpoint
Threshold
LED Display Low Setpoint
(Amperes)
Output Relay
CSD-SF0C0-1 Solid Fixed 0.25
CSD-SA1E0-1 Solid Adjustable Yes 1.00
CSD-SA1E1-1 Solid Adjustable Yes 1.00 SPST, , 10 A @ 260 VAC, 5 A @ 30 VDC
CSD-CF0A0-1 Clamp/Split Fixed 0.15
CSD-CF0J0-1 Clamp/Split Fixed .5
CSD-CA1G0-1 Clamp/Split Adjustable Yes 1.25
CSD-CF0J1-1 Clamp/Split Fixed .5 SPST, , 10 A @ 260 VAC, 5 A @ 30 VDC
CSD-CA1G1-

1、 公司在德國，美國都有合作伙伴，直接廠家采購，議價能力強，可盡量降低我們的采購成本！

2、 上海公司是新公司，對于新客戶，付款方式靈活：

1）現貨產品可不用付款，采用物流代收款（過5000元，需要到物流自提）。

2）  期貨產品（正常情況）需預付30%預付，尾款Rmb20000.00內，可以物流代收款，過Rmb20000，建議到我公司提貨，我公司可適當承擔部分費用。

3、德國，美國公司集中采購，統一清關。

4、貨期快，標準貨期：6-8周
4、 每周從美國發貨，次周可清好關.。
5、 產品可修或換。

聯系人：常利樂    132627