|
Inspector射線檢測儀(可檢測α、β、γ和X射線)主要技術指標：
測量范圍0.001-100.0mR/hr，0-350,000CPM，總計數1-9,999,000次；或0.01-1,000μSv/hr，0-5,000CPS
Inspector射線檢測儀(可檢測α、β、γ和X射線)圖片：
Inspector射線檢測儀(可檢測α、β、γ和X射線)功能介紹:
·Inspector射線檢測儀用于檢測α、β、γ和X射線
·內置2英寸扁平螺旋式GM探測器，對α和β射線源的靈敏度很高
·LCD數字顯示讀數,可選擇mR/hr、CPM、CPS或mSv/hr等不同單位
·自動補償GM管的滯后時間
·抗飽和電路可避免強輻射場的干擾
·總數/定時器(Total/Timer)功能可對輕微污染進行定時讀數的檢測，定時讀數周期從1分鐘到24小時
·“安全”(Safety First)的校準功能可避免校準人員的輻射接觸
·檢測儀符合歐洲CE要求
Inspector射線檢測儀技術規格
探測器 鹵素淬滅劑GM管，有效直徑45mm，云母窗密度1.5-2.0mg/cm2
顯示 四位數字LCD顯示，模式指示
測量范圍 0.001-100.0mR/hr，0-350,000CPM，總計數1-9,999,000次；或0.01-1,000μSv/hr，0-5,000CPS
γ射線靈敏度 3500CPM/mR/hr（對于Cs-137）；小可探測水平0.02mCi（對于I-125，接觸探測）
效率 Sr-90(546KeV, 2.3MeV βmax)約75%；C-14(156KeV βmax)約11%；Bi-210(1.2 MeV βmax)約64%；Am-241(5.5MeV α)約36%
平均周期 顯示器每3秒更新讀數，正常輻射強度下顯示前30秒的平均值。如果輻射強度增強，平均周期將縮短。用戶可以選擇短3秒的平均周期
定時器 可以設置采樣周期為1-10分鐘(增量1分鐘)、10-50分鐘(增量10分鐘)或1-24小時(增量1小時)
報警 蜂鳴器聲音報警，用戶或通過三個按鈕調整報警水平
±15%（＜50mR/hr）；±20%（50-100mR/hr）
抗飽和 在超過讀數達100倍的場合，讀數保持在滿刻度
溫度范圍- 20-+50℃
電源 1節9V堿性電池，平均電池壽命在一般本底下2160小時，在1mR/hr水平下625小時（蜂鳴器關閉）
I/O接口 兩用微型插口用于驅動CMOS或TTL設備，發送計數到計算機或數據記錄器。超微型插孔用于電子校準
計數燈 對每次輻射事件，紅色LED閃爍
聲音 對每個輻射事件，蜂鳴器聲音提示?？梢栽O(shè)置成靜音。
尺寸重量 50×80×30(mm)，323g(含電池)
The InspectorAlert
Handheld Surface Contamination Monitor
The Inspector Alert measures alpha, beta, gamma, and x radiation using a 2-inch pancake GM detector with high sensitivity to common beta and alpha sources. The easy-to-read digital display shows readings in your choice of mR/hr or μSv/hr, CPM, or CPS. The Total/Timer feature allows timed readings from one minute to 24 hours for precise measurement of low-level contamination. An audible alert sounds when the radiation reaches a user-adjustable level. The Inspector Alert meets CE certification requirements for Europe. |
·Monitor personal radiation exposure
·Monitor an area or perimeter
·Detect radiation leaks and contamination
·Ensure regulatory compliance
·Monitor changes in background radiation
·Demonstrate principles of nuclear physics
·Check for radioactive minerals in the earth |
Specifications
Sensor |
Halogen-quenched Geiger-Mueller tube. Effective diameter 1.75" (45 mm). Mica window density 1.5-2.0 mg/cm2. |
| Averaging Periods |
Display updates every 3 seconds, showing the average for the past 30-second time period at normal levels. Averaging period decreases as radiation level increases. User can select fast 3-second averaging period. |
| Timer |
Can set 1-10 minute sampling periods in one-minute increments, 10-50 minute sampling periods in 10-minute increments, and 1-24 hour sampling periods in 1-hour increments |
| Display |
4-digit liquid crystal display with mode indicators |
| Operating Range |
mR/hr: .001 to 100.0
CPM: 0 to 350,000
Total: 1 to 9,999,000 counts
mSv/hr: .01 to 1,000
CPS: 0 to 5,000 |
| Sensitivity |
Gamma
3500 CPM/mR/hr referenced to Cs-137
Smallest detectable level for I-125 is .02 mCi at contact
Beta
C-14 (49 keV avg. 156 keV max.): 5.3%
Bi-210 (390 keV avg. 1.2 MeV max.): 32%
Sr-90 (546 keV and 2.3 MeV): 38%
P-32 (693 keV avg. 1.7 MeV max.): 33%
Alpha
Am-241 (5.5 MeV): 18%
|
| Efficiency |
For 4 pi geometry at contact |
| Accuracy |
± 15% up to 50 mR/hr; ± 20% up to 100 mR/hr |
| Anti-Saturation |
Readout holds at full scale in fields up to 100 times the maximum reading |
| Count light |
Red LED flashes with each radiation event |
| Beeper |
Beeper beeps with each radiation event; can be muted |
| Outputs |
Dual miniature jack for CMOS or TTL devices, sending counts to computer or data logger. Submini jack for electronic calibration. |
| Power |
One 9-volt alkaline battery; battery life is average 2160 hours at normal background, average 625 hours at 1 mR/hr with beeper off |
| Size |
150 x 80 x 30 mm (5.9" x 3.2" x 1.2") |
| Weight |
323 grams (11.4 oz) including battery | |
| |
| 射線/輻射檢測儀熱賣產品 |
| TES-1391電磁波測試計 | | |
