頭盔下額撞擊試驗機 Helmet amount under bump testing machine 特性 : Characteristics:     本儀器適用于頭盔進行下額沖擊碰撞試驗,是用經評判    頭盔下額抗沖擊性能的一種測試儀器.本機采用PLC控制    技術.利用PLC的內部演算,自動提錘到預定高度,并隨時    顯示高度,并在LCD顯示器上顯示設置高度，下落速度，    重?fù)糇冃瘟康葏?shù),該儀器可靠性好,高. The machine is used to test the helm amount under impactive bump, and a instruments with the function of shock resistance, use of PLC control technique and PLC inner calculation,  automatically lift the hammer to scheduled height, and display the height at any time, other data such as setting height, falling speed, and quantity of strike deformation and etc, displayed on LCD,  the instruments is reliability and with highly precision. 1.      本儀器依據SNELL SA/K2010標準. 1. Refer to standard SNELL SA/K2010 2.沖擊高度：可設定,1800 mm. 2.Impactive height: Adjustable, highest:1800MM (軟件介紹:) (Soft introduction) 1.      配接標準的位移傳感器等信號調理器輸入. 1.Connecting standard shift sensor and so on signal adjuster input. 2.采用LCD文本面板的形式,對測試方法自動識別和設置 2.LCD used in the form of text to identify and set the testing method automatically.  具有豐富的多種參數設置功能及分析處理功能. Have various of parameter and analysis functions.   如有任何疑問,歡迎隨時和我們聯系,或登陸 https://www.tonyhk.com         
Should you have any enquiries, Please don’t hesitate to contact me   ※實驗室的設計規劃；
※儀器及消耗品的配備；
※安裝及培訓；
※預防性維修（保養）計劃服務；
※校準計量服務；
※產品檢測及；
※Design program for laboratory
※Provision of all testing machines and consumables
※Installation and training
※Maintenance plan service
※Product testing and certification service
TONY東尼集團-東莞事業部
東莞市東尼儀器有限公司
NAME:Mr Tang

TEL:86-
MP:+
TEL:86-
FAX:86-
地址:廣東省東莞市莞城區東縱大道
TONY 東尼國際(香港)有限公司
TONY INTERNATIONAL(HK)CO.,LIMITED
TEL:0
FAX:0
香港德輔道中172號南豐大廈1708A1室
Room 1708 A1 Nan Fung Tower173 Des Veux Road C.,HongKong
https://www.tonyhk.com