- 品牌/商標：WAVETEK
- 企業類型：貿易商
- 新舊程度：二手
- 原產地：美國
無線電綜合測試儀 WAVETEK 4032 STABILOCK
廠家: WAVETEK
- 接收和發射部分頻率范圍 0.4MHz - 1GHz (機型二 400kHz - 2300MHz)
- 頻譜分析儀頻率范圍 0.4MHz - 1GHz (機型二 400kHz - 2300MHz [1GHz以內span范圍1kHz-50MHz][1GHz以上span范圍1kHz-10KHz])
- 性能指標pdf
通用模擬/數字通信測試儀 4032 STABILOCK是快速、簡易測試之通信測試儀。按一下按鈕即可測試模擬和數字移動電話和對講機及電臺。
模擬和數字移動電話的通用測試平臺。
TETRA 及TETRAPOL的測試儀解決方案。
快速、高效的頻譜儀分析選件。
模擬和數字無線中繼線測試功能。
對基站的全面測試。
適用于數字系統
?。狦SM/PCN/PCS
＊CDMA/IS-95
?。狣ECT
?。狝MPS/IS-136
?。猅ETRA
?。狿DC
高速度
完成GSM手機測試僅需60秒種。在大多數系統 （例如 GSM，PCN／PCS）之間 可實現方便的切換。
高
的測量確保了具有復驗性的、準確性的測試結果。 射頻蜂窩功率測試典型值可達5%。
擴展性能
新系統不僅可實施對 DECT 制固定臺、移動臺的測量，也可對TETRA制及其它無線集群系統進行測量。
快速頻譜分析儀
功能強大前頻譜分析儀， 測量范圍從 O.4MHZ到 2.3GHZ。其功能包括自動調諧，縮放和GSM觸發模式。
簡單的自動化過程
利用PC機編輯軟件包來生成 IEEE-488或AUTORUN程序非常方便，這些軟件包包括語法檢測、庫函數、存貯和程序管理程序。 靈活方便的無線綜合測試儀STABILOCK 4O32系列產品滿足了世界范圍內移動無線電通信制造商和維修機構的需求。可針對目前6種主要數字制式和30多種模擬制式無線電通信系統進行測量。靈活的模塊化結構 4032系列采用內置模塊和存貯卡，使升級變得易如反掌。 模塊化設計不僅保護了投資，還允許用戶隨著無線電技術的成熟或需求的變化測試新系統。借助4032一貫的屏幕布局，GPIB命令以及簡單的存貯卡軟件安裝，技術人員只需簡單的培訓就能使用新的模塊及功能。 適用于維修中心的測試儀該產品簡捷的設計大大提高了生產率，與同類解決方案相比，節省了空間，降低了重量。超大易讀屏幕對于人工操作來講意義重大，屏幕上的指針式顯示能夠?yàn)檫h(yuǎn)距離設備調整提供清晰的指示。清晰的布局，軟功能鍵和光標控制鍵提供了直觀的用戶界面。
適用于生產線的測試儀快速、準確的測試為數字無線電通信終端制造商提供了理想的解決方案。GPIB編程或與局域網服務器的連接靈活地實現了自動測試。AUTORUN自動執行程序，大大方便了測試工作。利用ARE編輯軟件包在PC機上進行編輯可以從廣泛的ACTERNA庫中快速地創建或修改自動執行程序。
方便、全面的基站測試
4O32系列提供AMPS，NAMPS，D-AMPS，IS-136，CDMA或 ETA CS基站測試。在許多情況下可以利用用戶自編的 AUTORUN程序來實現基站測試的自動化。 簡潔、輕巧的設計大大方便了基站安裝及維護人員。網絡維護網絡或信道出現故障時，客戶會因經濟上的損失而一籌莫展，因此維護時需分秒必爭。4032系列的高速測量功能實現了故障的迅速排除，因而使客戶損失大大減少。而清晰的顯示可以提供快速準確的結果。利用星圖顯示可以簡化I和Q的校準工作。小//平均值統計可以使優化更方便?？焖兕l譜分析儀（高達 2.3GHz）提供帶內和帶外檢測， 用來識別在天線或耦合器處生成的干擾信號或內部調制。
CDMA測試
CDMA基站測試軟件可以用在8OOMHZ或1900MHZ頻段。星圖式顯示可看出調制信號的對稱性，信道功率顯示可顯示引導碼信道及話音信道功率。此外，許多檢測過程只需輸入射頻，而無需額外同步時鐘。 檢測內容包括信道功率，頻率容限，波形質量（rho），向量大小以及引導碼信道時間偏移，可以測量每一碼信道的時間、功率、相位。
快速的星圖
查看相位誤差，幅值，RMS向量 誤差，功率和ΔP/信號有助于檢查NADC/IS—54/IS—136基站故障。
清晰的顯示
數字測試可采用模擬表頭。圖形化和數字測量結果便于快速分析。
鄰近信道功率
數字顯示，簡化了信道、鄰近信道以及次鄰信道功率的分析。
綜合性能來自于硬件、軟件的配置
- GSM測試（手機）
1.發射功率
2.相位和頻率誤差
3.時間功率樣板及脈沖寬度
4.調制頻譜
5.手機處于測試模式下的發射測量
6.誤碼率（BER）
7.幀刪除率（ER）
8.尋呼靈敏度
9.手機測試
10.小/，平均值統計
11.音頻RMS - CDMA測試（基站）
1.信道功率
2.碼域功率
3.碼域時間
4.碼域相位
5.加性高斯白噪聲 （AWGN）源
6.波形質量（rho）
7.矢量誤差圖（星圖顯示）
8.相讓誤差
9.引導時間偏移 - IS－136測試（手機）
1.星圖顯示（圖形／數字
2.調制頻譜
3.時間功率脈沖
4.ACPM鄰信道功率
5.誤碼率僅(BER）80O和1900MHZ系統
6.模擬／數字控制信道到模擬/數字TCH
7.站信道切換
8.MAHO功能
9.ACELP或VSELP
10.話音環路 - D－AMPS/NAMPS（基站）
1.功率測量
2.數字和模擬操作
3.頻譜分析儀
4.星圖顯示
5.鄰近和次鄰信道功率 - DECT測試（FP，PP）
1.射頻的準確性和穩定性
2.載波：標稱TX功率
3.頻率誤差
4.調制
5.頻偏
6.飄移
7.不期望的射頻調制及干擾
8.抖動
9.上升鏈路時間
10.參考時鐘
11.音頻測量
Stabilock 4032 is an universal Communications Test Set for digital and analog devices.
A huge number of measuring features.
High spectral purity - very low phase noise
10 MHz reference oscillator with an aging rate of <5 x 10exp-8/month
Modulation modes: AM - FM - phase
Frequency range: 0,4 MHz to 2,3 GHz
Resolution: 50 Hz (<500 MHz) - 100 Hz (500 MHz to 999.999 MHz) - 1 kHz (1 GHz to 2,3 GHz)
Output level: -122 dBm to +13 dBm (RF DIRECT) or -142 dBm to -7 dBm (RF)
Resolution output level: 0,1 dB
Frequency counter
Duplex operation and power detector
Oscilloscope and spectrum analyzer option
AF-voltmeter - AF-counter - Distortion meter - SINAD-meter
HP-IB (IEEE 488) and RS 232 interface
技術指標
| Synthesizer | |
| Spectral Purity | |
| PHASE NOISE(25-kHz offset) | |
| f<500MHz | <-121dBc/Hz |
| f≧500MHz | <-115dBc/Hz |
| RESIDUAL FM | |
| f<500MHz | 4Hz(rms,CCITT-weighted) |
| f≧500MHz | 8Hz(rms,CCITT-weighted) |
| NON-HARMONIC SPURIOUS SIGNALS>500Hz off carrier | <-55dBc |
| HARMONICS | |
| Level<-15.1dBm | <-25dBc |
| Level≧-15.1dBm | <-20dBc |
| RESIDUALAM | <0.02%(rms,CCITT-weighted) |
| 10MHz reference oscillator | |
| WARMUP TIME | <3min for frequency error <5*10-7 <10minfor frequency error10-7 |
| FREQUENCY ERROR | <1*10-7(T=5 to 45℃) |
| AGING | <5 |
| OUTPUT LEVEL | approx.0.4V(into 50Ω) |
| SYNCHRONIZATION | 10MHz,V>150mVrms(into200Ω) |
| RF Generator | |
| Carrier frequency | |
| FREQUENCY RANGE | 0.4to 999.9999MHz |
| RESOLUTION | |
| f<500MHz | 50Hz |
| f≧500MHz | 100Hz |
| FREQUENCY ERROR | as reference oscillator |
| Output level | |
| RF SOCKET | -142to -7dBm(max.-13dBm with AM) |
| RF DIRECT SOCKET | -122 to +13dBm(max.+7dB with AM) |
| resolution | 0.1dB |
| LEVEL ERROR INTO 50Ω | |
| RF socket | |
| Level≧-130dBm | <1.3dB |
| Level>-15.0dBm | <2dB |
| RFDIRECT socket | |
| Level≧-110dBm | <1.6dB |
| Level>+5.0dBm | <2.5dB |
| VSWR(50Ω) RF SOCKET | <1.1 |
| EMF setting range with out interruption(not with AM) | 0 to 15dBusable to 20dB |
| Additional level error | 0.1dBper dB |
| Modulation | |
| FM(AC-coupled) | |
| FREQUENCY DEVIATION | 0 to 40kHz |
| MODULATION FREQUENCY(int.and ext.) | 30Hz to 30kHz |
| RESOLUTION | 10Hz |
| SETTING ERROR | |
| fmod=300Hzto 3kHz | <5%+3digits |
| fmod=30Hzto 20kHz | <10%+3digits |
| DISTORTION(dev.<10kHz) | |
| fmod=300Hzto 3kHz | <1% |
| EXT.MOD.INPUT | 20kHzFM=0.707 Vrms into 600Ω |
| FM(external DC-coupled) | |
| FREQUENCY DEVIATION | 0 to 5kHz |
| MODULATION FREQUENCY | 0 to 30kHz |
| CENTRE-FREQUENCY ERROR | <100Hz +frequency error of reference oscillator |
| фM | |
| PHASE DEVIATION | 0 to 6rad(fmod*rad≧20kHz) |
| RESOLUTION | 0.01rad |
| MODULATION FREQUENCY | 200Hz to 6kHz |
| SETTING ERROR | |
| fmod=300Hzto 3kHz | <1% |
| EXT.MOD.INPUT | 20RAD фM=0.707Vrms into 600Ω |
| AM | |
| MODULATION DEPTH | m=0 to 99.9% |
| RESOLUTION | 0.1% |
| MODULATION FREQUENCY | 30Hz to 10kHz |
| SETTING ERROR FOR M≧90% | |
| fmod=30Hzto 10kHz | <0.1*m+1digit |
| DISTORTION for m<50% | |
| fmod=300Hzto 3kHz | <2% |
| EXT.MOD.INPUT | 50%AM=0.707Vrms into 600Ω |
| RF Analyzer | |
| Frequency measurement | |
| FREQUENCY RANGE | 2 to 999.9999MHz |
| RESOLUTION | 10Hz |
| ADMISSIBLE INPUT LEVEL | |
| on RF socket | 0.1 mW to 125W |
| MEASURING ACCURACY | as reference oscillator±10Hz |
| Frequency-offset measurement | |
| FREQUENCY RANGE | 2to 999.9999MHz |
| MEASURING RANGE | 0 to ±99.99kHz |
| RESOLUTION | |
| f<10kHz | 1Hz |
| f<≧10kHz | 10Hz |
| ADMISSIBLE INPUT LEVEL | |
| on RF socket | 2μW to 125W |
| on RF DIRECT socket | 1mV to 1V(measuring range:0 to±15kHz) |
| MEASURING ACCURACY | as referenceoscillatior+3Hz(+1digit for offset≧10kHz) |
| RF-power measurement,RF-socket(broadband) | |
| FREQUENCY RANGE | 2to 999.99MHz |
| MEASURING RANGE | 1mW to 125W(average) |
| RESOLUTION | |
| P<1W | 1mW |
| P<10W | 10mW |
| P<≧10W | 100mW |
| MEASURING ACCURACY(w/o modulation) | |
| P>200mW | <10%+1digit (f=20to 500MHz) <12%+1digit (f=6 to 999.9999MHz) |
| RF-power measurement(bandwidth approx.3MHz) | |
| FREQUENCY RANGE | 2 to 999.9999MHz |
| MEASURING RANGE | |
| RFsocket | -45 to +37dBm |
| RFDIRECT socket | -65 to +17dBm |
| MEASURING ACCURACY | 3dB |
| RESOLUTION | 0.1dBm |
| Modulation measurement | |
| FM measurement,RF socket(broadband) | |
| FREQUENCY RANGE | 2 to 999.9999MHz |
| INPUT LEVEL | 0.1mW to 125W |
| MEASURING RANGE | 0 to 25kHz |
| RESOLUTION | 10Hz |
| MEASURING ACCURACY(dev.<<10kHz) | |
| fmod=300Hzto 3kHz | 5%±1digit±peak residual FM |
| fmod=100Hzto 10kHz | 10%±1digit±peak residual FM |
| DEMODULATION DISTORTION | |
| fmod=300Hzto 3kHz | <0.5% |
| PEAKRESIDUAL FM | <50Hz or <10Hz/100MHz |
| FMmeasurement,RF DIRECT socket(narrowband) | |
| FREQUENCY RANGE | 2 to 999.9999MHz |
| INPUT LEVEL | -50 to -20dBm |
| MEASURING RANGE | 0 to 10kHz(fmod*dev.<10kHz) |
| MODULATION FREQUENCY | fmod=0 to 6kHz |
| RESOLUTION | 10Hz |
| SENSITIVITY | betterthan 2mV(3kHz FM dev.,10dB SINAD,CCITT-weigthed) |
| IF BANDWIDTH | 30kHz |
| фM measurement,RF socket(broadband) | |
| FREQUENCY RANGE | 2 to 999.9999MHz |
| INPUT LEVEL | 0.1mW to 125W |
| MEASURING RANGE | 0 to 6rad (FM dev.<50kHz) |
| RESOLUTION | 0.01rad |
| MEASURING ACCURACY | |
| fmod=300Hzto 3kHz | 6%±2digits |
| fmod=200Hzto 10kHz | 10%±2digits |
| DEMODULATION DISTORTION | |
| fmod=300Hz to 3kHz | <0.5% |
| фM measurement,RF DIRECT socket(narrow band) | |
| FREQUENCY RANGE | 2 to 999.9999MHz |
| INPUTLEVEL | -50 to -20dBm |
| MEASURING RANGE | 0 to 3 rad(fmod*фM dev.<15kH) |
| MODULATION FREQUENCY | 200Hz to 6kHz |
| SENSITIVITY | better than 2mV(3rad фM dev,10dB SINAD CCITT-weighted) |
| IF BANDWIDTH | 30kHz |
| AM measurement | |
| FREQUENCY RANGE | 2 to 999.9999MHz |
| MEASURING RANGE | 0 to 100% |
| INPUT LEVEL | |
| RF socket | 1mW to 125W |
| RF DIRECT socket | 0.01mW to 0.5W |
| RESOLUTION | 0.1% |
| MEASURINGACCURACY(m<≧10% | |
| fmod=Hzto 10kHz | 10%±2digits |
| DEMODULATION DISTORTION | |
| fmod=300Hzto 3kHz | <1% |
| MODULATION FREQUENCY | DC to 10kHz |
| Spurious-modulationmeasurement | |
| INPUT LEVEL | |
| RF socket | 1mW to 125W |
| RFDIRECT socket | 20mW to 1V |
| MEASURING RANGE | 0 to -40dB(CCITT-weighted)referred to 3kHz FM dev.)3rad фM dev.or 30%AM |
| MEASURING ACCURACY | 1dB |
| AF Generator | |
| Modulation generator GEN A | |
| FREQUENCY RANGE | 30Hzto 30kHz |
| RESOLUTION | |
| f<3kHz | 0.1Hz |
| f≧3kHz | 1Hz |
| FREQUENCY ERROR | <0.01% |
| LEVEL RANGE(EMF) | 0.1mVrms to 5Vrms |
| RESOLUTION | |
| EMF≦5V | 10mV |
| EMF≦1V | 1mV |
| EMF≦0.1V | 0.1mV |
| EMF≦10mV | 10μV |
| LEVEL ERROR | |
| f=100Hz to3kHz | <3% |
| f=50Hzto 15kHz | <10% |
| DISTORTION | |
| f=30Hzto 3kHz | <0.5% |
| f>3kHz | <1% |
| OUTPUT IMPEDANCE(balanced) | |
| f=300Hzto 3kHz | <10Ω |
| f=30Hzto 30kHz | <40Ω |
| OUTPUT IMPEDADNCE(unbalanced) | 600Ω±5% |
| PERMISSIBLE LOAD IMPEDANCE | >200Ω |
| AF Analyzer | |
| AF voltmeter | |
| FREQUENCY RANGE | 30Hz to 30kHz or to CCITT P53A |
| MEASURING RANGE | 0.1mV to 20V |
| RESOLUTION | |
| Level<0.1V | 0.1mV |
| Level<1V | 1mV |
| Level<10V | 10mV |
| Level<20V | 100mV |
| MEASURING ACCURACY | |
| f=300Hzto 3kHz | 3% |
| f=50Hzto 15kHz | 6% |
| SOURCE IMPEDANCE | >100kΩ or 600Ω±3% |
| INPUT CAPACITANCE | 20pF |
| AF counter | |
| Frequency range | 30Hz to 30kHz |
| INPUT LEVEL | 5mV to 20V |
| RESOLUTION | |
| f<300Hz | 0.1Hz |
| f<10kHz | 1Hz |
| f≧10kHz | 10Hz |
| MEASURING ACCURACY | 0.01%±1digit |
| Distortion meter | |
| INPUTLEVEL | 0.1 to 20V |
| TEST FREQUENCY | 1kHz±5Hz |
| MEASURING RANGE | 0 to 99% |
| RESOLUTION | 0.1% |
| MEASURING ACCURACY | |
| d = 1 to 90% | 5% of emas.value±3 digits |
| SINAD meter | |
| INPUT LEVEL | 0.1 to 20V |
| MEASURING RANGE | 1 to 46dB |
| RESOLUTION | |
| SINAD<30dB | 0.1dB |
| SINAD<≧30dB | 0.5dB |
| MEASURING ACCURACY for SINAD <30dB | 0.8dB±1digit |
| Scope & Analyzer | |
| Spectrum Analyzer | |
| FREQUENCY RANGE | |
| FREQUENCY ACCURACY better than 2% of sweep with INPUT-LEVEL RANGE for measuring accuracy 3dB in the frequency range 0.5*fc≦f≦2*fc | |
| RF socket | -70 to +47dBm |
| RF DIRECT socket | -90 to +13dBm |
| SWEET WIDTH | 200kHz,2MHz,10MHz |
| SWEEP TIME | |
| Wweep width 2MHz and 10MHz | approx.500ms |
| Sweep width 200kHz | approx.2s |
| EVEALUATION BANDWIDTH | |
| Sweep width 2MHz and 10MHz | 30kHz |
| Sweep width 200kHz | 6kHz |
| INHERNT NOISE on RF DIRECT socket | |
| Sweep width 2MHz and 10MHz | -95dBm |
| Sweep width 200kHz | -105dBm |
| Oscilloscope | |
| INPUT SEXTERNAL | Zi=1MΩ/40pF(AC/DC) |
| INPUT SINTERNAL | RX mod,TX demod,duplex demod,AF voltmeter,residual distortion |
| FREQUENCY RANGE | DC(3Hz) to 20kHz |
| LEVEL ERROR | <10% +0.2div |
| GRATING | 6*10div |
| HORIZORTAL DEFLECTION | 2μs/div to 500ms/div |
| VERTICAL DEFLECTION | 2mV/div to 10V/div or 160Hz/div to 8kHz/div (FM) 0.16rad/div to 8rad/div (фM) 0.8%/div to 40%/div (AM) |
| TRIGGER | ±slopeselectable trigger leve |
| OPERATING MODES | auto,norm,one-shot,freeze,tyne measurement(max.reslution 2.5μ) |
| Selective-call encoder and decoder | |
| Standard tone sequences | XVEI 1,CCIR,VDEW,ZVEI 2,EEA,NATEL,EIA,EURO,CCITT |
| User-definedtone sequences | |
| Sequence of up to 30 tones can be stored by user.Also double tones and underlying continuous tone (with GEN B option) | |
| Encoder | |
| Operating modes | |
| SINGLE-TONE SEQUENCE(max.30 tones) DOUBLE-TONE SEQUENCE(with GEN B option) (single-toneand double-tone sequences can be transmitted continuously) ACKNOWLEDGEMENT CALL(max.30 tones) from response time of <100ms acknowledgement call only possible with optional duplex FM/фM stage FREQUENCY ERROR | |
| Decoder | |
| Decoding of each tone of tone sequencse (max.30tones) Continuous decoding can be set | |
| General | |
| Dimensionsand weight | |
| H*W*D | 230mm*375mm*486mm |
| WEIGHT | approx.18.5kg |
| Power Supply AC | 94 to 132Vor 187 to 264V(47 to 450Hz) |
| P max | approx.110W(incl.options) |
| Environment | |
| OPERATING TEMPERATURE | 5to 45℃ |
| STORAGE TEMPERATURE | -40 to +70℃ |
| RELATIVE HUMIDITY | max.90% |
| Mechanical strength (to DIN 40046) | |
| SHOCK | 25g |
| VIBRATION | 5to 10Hz for 10mm amplitued 10 to 60Hz,2g constant |
| EMC conformity | EN 55022:19995,class B EN 60801:1994,part 2test level 1 ENV 50140:1995,test level 2 IEC1000-4-4:1995,test level 3 |
| Safety | EN61010:1995,part 1 |
| IEEE-bus interface | |
| STANDARD | IEEE-488 |
| CONNECTOR | 24-way |
| FUNCTIONS | AH1,SH1,L2,T1,SR1,RL1,DC1 |
| Frequency extension | |
| The following specifications apply to the FEX option | |
| RF Generator | |
| Carrier frequency | |
| FREQUENCY RANGE | 1.0 to 2.3GHz |
| RESOLUTION | 1kHz |
| Output level | |
| RF socket | -142 to -20dBm |
| RF DIRECT SOCKET | -122 to 0dBm |
| LEVEL ERROR into 50Ω(1.0 to 2.0GHz) | |
| RF socket | 1.5dB(overrange -110 to -20dBm) |
| VSWR(50) RF socket | <1.2 |
訂貨信息
| STABILOCK4032 | 108 802 |
| RF Frequency Extension 2.3GHz | 248 295 |
| High-Speed Spectrum Analyzer | 248 291 |
| GSM MS Test Autorun program | 897 078 |
| Transport Case | 300 692 |
| GSM 900/1800/1900MS Test Package | 248 296 |
| incl.STABILOCK4032 | |
| RF Frequency Extension 2.3GHz | |
| GSM hardwareoption | |
| Spectrum Analyzer | |
| GSM 900/1800/1900 test software | |
| DECT Package incl.STABILOCK4032 | 248 255 |
| RF Frequency Extension 2.3GHz | |
| EDCT module | |
| DECT FP/PP test software | |
| CDMA BS Test Package incl.STABILOCK4032 | 248 302 |
| High-Speed Spectrum Analyzer | |
| CDMA module | |
| CDMA 800/1900MHz test software | |
| IS-136 MS Test Package incl.STABILOCK4032 | 248 304 |
| RF Frequency Extension 2.3GHz | |
| D-AMPS module+Data module | |
| IS-136 MS test software | |
| BATE AMPS BS Test Package | 248 198 |
| BATE ETACS BS Test Package | 248 144 |
| TETRA-380 MS Package | 248 307 |
| incl.Duplex+IQ-380 | |
| TETAR module | |
| TETRA MS test software | |
| TETRA/FEX MS Package | 248 308 |
| incl.RF Frequency Extension 2.3GHz | |
| TETRA module | |
| TETRA MS test sortware | |
| TETRA/Std.Package BS Test | 248 365 |
| incl.TETRA Module,Duplex+IQ-380 | |
| TETRA BS Test Software | |
| High-Speed Spectrum Analyzer | |
| TETRA/FEX Package BS Text | 248 366 |
| incl.TETRA Module | |
| RF Frequency Extension | |
| TETRA BS Test Software | |
| High-Speed Spectrum Analyzer | |
| Tetrapol MS Package incl.STABILOCK4032 | 190 115 |
| RF Frequency Extension 2.3GHz | |
| TETRAPOL MS Test Software | |
| TETRAPOL module | |
| TETRAPOL PC Softwqre | |
| GPIB cable,Interface box,Cable set |
附件
| Duplex FM/ф stage | 229 062 |
| Control interface A(8 relays) | 236 035 |
| Control interface D(24 relays+20TTL) | 236 038 |
| 2nd Modulation generator | 208 032 |
| Tracking | 229 076 |
| RS-232/Centronics interface | 236 043 |
| Keyboard | 248 192 |
| VSWR directional coupler + access | 248 104 |
| VSWR bridge + accessories | 248 145 |
| SSB kit | 248 154 |
| Adjacent channel power meter(ACPM) | 229 035 |
| ACPM upgrade kit | 248 270 |
| Fast Spectrum Analyzer | 248 291 |
| 2nd RF generator + Fast Tracking | 248 293 |
| DTMF module | 248 171 |
| DC voltmeter/ammeter | 248 172 |
| Various highpass,lowpass bandpass,bandstop filters Various notch filters | |
| AC/DCpowr supply (new) | 204 033 |
| NADC 900MHz hardware option | 248 271 |
| NADC 450MHz hardware option | 248 277 |
| NADC PCM interface(Ericsson BST) | 248 282 |
| Cable set for Ericsson digital NADC transceiver | 248 283 |
| GSM hardware option | 248 274 |
| NADC-/GSM upgrade kit | 248 281 |
| 2nd RF generator and FRX exclude each other;Not all options can be fitted into one STABILOCK;Some options Please ask your nearest Sales Representative | |
| Software options | |
| NMT 450 i/900 Scandinavia | 897 911 |
| NMT 450 i | 897 916 |
| NMT 900 Scandinavia | 897 071 |
| NMT France NMT Benelux | 897 920 |
| NMT Turkey | 897 901 |
| NMT 450 Universal | 897 915 |
| NMT 900 Universal | 897 902 |
| NMT 450/900 Base-Station Test | 897 905 |
| NMTEL-C(Switzerland) | 897 930 |
| Network C Austria(C-Netz? Osterreich) | 897 910 |
| Network D FRG(Netz-C BRD) | 897 90 |
| Network C Portugal | 897 062 |
| C-Net SAPO | 897 063 |
| Tracking | 897 806 |
| EAMPS | 897 950 |
| ETACS UK | 897 940 |
| TACS Japan(JTACS) | 897 945 |
| PDC MS Test | 897 909 |
| NAMPS | 897 903 |
| NTACS | 897 904 |
| NADC 900MHz BS Test | 897 072 |
| NADC 900MHz MS Test | 897 073 |
| NADC 450MHz BS Test | 897 908 |
| NADC 450MHz MS Test | 897 907 |
| NADC MS Test AUTORUN | 897 917 |
| RADIOCOM 2000HD | 897 970 |
| FMS | 897 082 |
| VDEW direct dialing | 897 086 |
| VDEW digital standard | 897 090 |
| VDEW digital(Bosch) | 897 095 |
| ZVEI binary | 897 084 |
| ZVEI binary(600 baud) | 897 085 |
| POCSAG(NRZ) | 897 080 |
| POCSAG(FFSK) | 897 081 |
| Cityruf(Germanversion of 897080) | 897 083 |
| DIGI-S(inclueds VEDW digital) | 897 097 |
| Trunking (MPT 1327/PAA 2424) | 897 089 |
| AT&T Microcell | 897 096 |
| CombinerTest | 897 985 |
| US-Singalling Formats | 897 092 |
| LTR=USSignalling | 897 093 |
| DSAT/DST(of NAMPS) | 897 094 |
| ATIS | 897 098 |
| FastIEE | 897 802 |
| 2.1GHz Analyzer Tracking | 897 928 |
| ARE AUTORUN Editor | 897 100 |
名詞解釋:
- The members of ETSI (European Telecommunications Standards Institute) developed the trunked radio standard TETRA (TErrestrial Trunked RAdio).The scope of users of TETRA includes not only the public safety organizations, but also, for example, users in the area of transports and public local traffic companies.
- In France by order of the Police Nationale, the French company Matra Nortel Communications developed the trunked radio system TETRAPOL, which is adapted to the needs of the public safety forces. TETRAPOL, a highly spectrum efficient FDMA technology, with many networks in operation globally, has proven its value to the UK MOD, NATO and UN in overseas assignments as well as to many other private and government customers.
- Point-to-point (PtP)
- Point-to-multipoint (PMP)
