| 用于精密工作。可以鉆直徑小至0.5mm的孔。帶3級滑輪。
| |
| | | | | | | 微型臺鉆床 TBM220
| | | | 優質的工作臺由帶棱壓鑄鋁件機加工而成（220X120mm）。帶刻度的可調節擋板。堅固的有硬鉻鍍層的鋼條柱，高280mm，直徑20mm。穩定的壓鑄機頭和內置的VDE的220-240V, 85W電機。工作安靜，壽命長。 配有平皮帶的3級鋁制滑輪，3級轉速分別為1800， 4700及8500rpm （低速下實現3倍扭矩）。帶有可調鉆孔深度刻度板的鉻制進給桿。3個高質量的球軸承轉軸運轉無波動。心軸凹槽用于安裝MICROMOT鋼制筒夾，并帶螺紋可安裝鉆頭夾頭（3/8”螺紋）。高的旋轉準確性，30mm進給量。實用的、可調節的鉆孔深度刻度板。喉口深度（條柱到鉆軸處）140mm。6個三開槽口鋼制筒夾,包括1.0-1.5-2.0-2.4-3.0-3.2mm。
28 128
| |
| | | 鉆頭夾頭，夾徑6mm | | | 適用鉆頭尺寸為0.5-6.0mm，旋轉速度10,000rpm。工業標準制造，旋轉準確性。3/8"螺紋，帶夾頭鍵, 用于微型臺鉆床TBM220。
28 122
|
| | | | | | MS 4臺鉗 |
| | 壓鑄鋅制品，3面機加工。加工槽適用于標準140/S鉆架以及臺鉆TBM220的可調節擋板。鉗口中有水平及垂直V槽。鉗夾寬50mm高10mm。夾寬34mm.
28 132
|
| | | 實用的可調節的深度刻度板。
| | 可選用的附件MS 4臺鉗。
|
|
|
| | | MICRO
Compound Table
KT 70
For increasing the function of the 140/S and TBM 220.
Stable aluminium with surface treatment.
Solid aluminium with surface treatment and adjustable dovetail slides for minimum play. Three T-slots to MICROMOT standard 12 x 6 x 5 mm. Adjustable ruler scale eases workpiece positioning. Zero-resettable hand wheels are calibrated to provide 1 mm movement per revolution, one division equals 0.05 mm. The clamps and securing bolts for the 140/S and TBM 220 are included.
General Data:Table size 200 x 70 mm. Travel is 134 mm (x axis) and 46 mm on the y axis. Height 42 mm.
27 100
| |
| Two clamps are included.
| | Table size 200 x 70 mm.
| | Handwheel with adjustable dials. 1 revolution = 1.0 mm, 1 division = 0.05 mm.
| | Moveable ruler eases workpiece positioning. |
|
|
|
|
